Many new cars aren’t as new as you may wish they were. Defects that occur along the production line are sometimes quickly sorted out without due care and removal of the transportation films, often covered in dirt due to sitting around can cause major defects if not removed carefully. Dealers will sometimes then give the vehicle a quick wash over with devastating results. There is the option of having the vehicle corrected and protected with paint sealants and waxes of your choice before or after collection depending on your requirements and the co-operation of the dealer. Each case is individual so please contact for further information.

---

This service is ideal for vehicles with minimal defects.

Citrus degreaser applied to whole vehicle.
Glue and tar remover applied locally where required. Starts to break down surface contaminants.
Wheels, tyres, arches and door shuts pre soaked.
Pre soaked with foam then rinsed, process repeated if necessary.
Body and wheels washed with paint friendly lambs wool mitts then rinsed.
Waffle weave towels used to dry vehicle.
Paint decontamination process with the use of detailing clay.
All plastic/rubber trim treated to remove dressing build up.
Vehicle rewashed and dried.
Paintwork cleaner applied to prepare paintwork for coatings.
Glaze applied to produce depth in the finish.
Sealant and/or wax applied as required. Depends on paint type.
Wax/Sealant applied to wheels
Dressing applied to tyres and trim.
Exterior metal and chrome cleaned and polished.
All glass surfaces cleaned.

---

Correction Detail

Over 95% of vehicles fall into the category of needing a full correction detail, due to paint contamination, swirl marks & fine scratches. Once your vehicle's paint has been corrected to a showroom finish, this level of work will rarely need to be carried out to such an extent again as long as the finish is maintained. It consists briefly of the following stages:

• Paint depth readings taken and recorded. Allow high and low spots to be recorded along with finding any repair work that may need special attention.
• Citrus degreaser applied to whole vehicle.
• Glue and tar remover applied locally where required.
• Wheels, tyres, arches and door shuts pre soaked.
• Pre soaked with foam then rinsed, process repeated if necessary.
• Body and wheels washed with various detailing brushes & paint friendly lambs wool mitts then rinsed.
• Waffle weave towels used to dry vehicle.
• Paint decontamination process with clay.
• Trim treated to remove dressing build up.
• Vehicle rewashed and dried.
• Machine polish all surfaces including windows and lights if required to remove defects. Repeat application if required. In some cases we will use 3 different grades of polish with various poloshing pads.
  
• Vehicle rewashed and dried if necessary to remove polish residue.
• Paintwork cleaner applied to prepare paintwork for coatings.
• Glaze applied to produce depth in the finish.
• Sealant and/or wax applied as required. Depends on paint type.
• Wax/Sealant applied to wheels
• Dressing applied to tyres and trim.
• Exterior metal and chrome cleaned and polished.
• All glass surfaces cleaned.

The level of wheel and arch cleansing is dependant on access. Some clients request wheels to be removed to allow full treatment of complex designs and multiple layers of sealant/wax to be applied to add protection, including unseen internal surfaces, which also aids future cleaning.

---